Questions, Answers And Solutions On Blackface Fender

Elizabeth asks…

how can i make mt guitar sound like slayer in raining blood?

have a Fender Squier Bullet (Strat) and i have a G-DEC Junior amp. My fave band is slayer and ive been trying to play the song Raining Blood. unfortunately, my guitar sounds nothing like it. Is there anyone who knows what settings i should put my amp on?

GAIN-0,1,2,3,4,5,6,7,8,9,10

VOLUME-0,1,2,3,4,5,6,7,8,9,10

TONE-0,1,2,3,4,5,6,7,8,9,10

AMP SELECT- JAZZ, ACOUST, METAL, METAL, HOT ROD, HOT ROD, BRITISH, BRITISH, BRITISH, BRITISH, BLACKFACE, BLACKFACE, BLACKFACE, TWEED, TWEED

FX SELECT- REVERB X4, DELAY X3, BYPASS, TREMOLO X2, FLANGE X2, CHORUS X4

all the rest are for metronome so i wont bother to put them down.

admin answers:

To tell you the cold hard truth.. You probably need a new guitar. Preferebly one with humbucker pickups with a high output. You might want to check out jackson or esp for some good heavy guitars. Because Slayer as you know is a thrash/death metal band, and most of the time they play hard.

When you get a new guitar, its recommended that you try it first, but what you’re primarily looking for are the sound and output of the pickups, and how well it fits to your playing style.

Other then that the only other option I could think of is buying a distortion pedal. You might want to try out a BOSS MT-2 Metal Zone. That has a pretty sweet distortion and is a really powerful pedal. That would cost you about $100 rather then spending $600+ on a decent guitar.

So your options are:
A new guitar
or
A Distortion Pedal

Anyway, good luck on trying to play like slayer

Wayne asks…

How can i make my amp and guitar sound like Green Day / Punk rock?

I am very new to all of this so I can use as much help as possible.

I just got this package: http://www.squierguitars.com/products/search.php?partno=0301620025
It comes with the Squire Affinity HSS strat guitar, and the Fender G-DEC Junior Amp

These are the settings that are available on my amp:
here is a picture of the settings: http://cachepe.zzounds.com/media/quality,85/brand,zzounds/G_DEC_Junior_2-25ddda2622d520119ccf76baad0c73f0.jpg
Gain (1-10)
Volume (1-10)
Tone (1-10)
Amp select (Blackface, British, Hot Rod, Metal, Acoust, Jazz, Tweed)
FX Select (Chorus, Flange, Tremolo, Delay, Reverb)
The rest of the settings are for the looping stuff (built in drums and bass)

My guitar has 5 pickup choices:
Position 1. Bridge Pickup
Position 2. Bridge and Middle Pickup
Position 3. Middle Pickup
Position 4. Middle and Neck Pickup
Position 5. Neck Pickup

Thank you very much in advance!
Is there anyway I can achieve a punk sound without having to buy anything else?

admin answers:

1. Purchase shotgun and ammunition for said shotgun.
2. Load shotgun.
3. Place barrel of shotgun in your mouth.
4. Pull the trigger.
5. ????
6. Profit!

Powered by Yahoo! Answers


Related Blogs

    Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

    Questions, Answers And Solutions On Best Tube Amps

    Bob asks…

    WHY does one of the tube fuses in my car audio system keep blowin?

    Ok, so I had my system installed at best buy and i have two Alpine Type R 12s powered by two Alpine MRP-M500 amps, one for each sub. I have a Fierce Audio distribution block to hold my two tube fuses….the original fuses were the 5AG40A fuse….anyways, the fuse for my left amp blew…took it into best buy, the guy gave me another one of the same kind….it blew again about a week later….took it BACK in. The guy asked what kind of fuse it was, i told him the 40, he said i prolly needed an 80 but he didnt have any so he gave me another 40 and a 60…i put the 60 in…it blew. WHAT THE HELL. The one on the right is not blowing, and everytime the left one blows its fried on the bottom of it…could the bottom clamps holding the fuse not be tight enough er somethin?? the amp doesnt get hot at all so I dont think its defective….suggestions?

    admin answers:

    Only a guess knowing the system is new but it still could be a bad speaker on the left or like said the wiring. Make sure that the connection on the speaker is tight, a loose connection can cause major problems.

    Davina asks…

    What are the best kind of pedals to use with a marshall amp?

    Ok, so im in the market and I want to buy a new amp and maybe an effects procesor, I bought a jay turser serpent Les Paul mainly for looks,because its basicly an epiphone,anyway so i want to get a better amp and im considering getting the following:
    MARSHALL 100 W
    Zoom Gfx3
    But i was told not to use the Zoom Gfx3 with a tube amp because the sound would be crap, so if you guys could help me out and tell me whats best? Im a singer in a band, and played acoustic for a long time but i dont know shit about electrics etc.
    I like the Zoom type electronic so i dont have to buy a bunch of pedals,but i like the qualaty of the marshall amps
    THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    admin answers:

    The best thing i have ever used and a bunch of people can back it up is the boss gt 10

    here are some videos

    http://www.youtube.com/watch?v=-F1m6xdS_2g

    John asks…

    Are Peavey Vypyr amps as bad as they say?

    I’m buying a Peavey Vypyr 75 Watt amp for practice(getting over drums)/gigging and I tried it out in stores and went through a lot of the amp and it seems weel worth it to me, but, why do people hate them so much? For $300 it’s the best you can get unless you go for soem million dollar tube amp. and PLEASE, do not tell me to get a tube amp. I really don’t want one(okay I lied, I do, but Im not saving EVERYTHING I HAVE, Im 14 for gods sake lol).

    admin answers:

    The Vyper is a great amp! Especially for a beginner. It has plenty of great features and very usable tone. For the price it can’t be beat. There are a lot of snobs out there that will tell you that tube amps are just better than solid state amps. While there is some truth to this I can tell you from experience that there are plenty of great sounding solid state amps out there too. It really depends on the user. By taking some time and experimenting with the controls you can easily conjure up some cool sounds. This is a great amp for your situation. It is loud enough to compete with an acoustic drum set, is very reliable, and has good enough tone for gigging in garages or small stages and backyards. It has some very cool effects built in so you do not have to blow a bunch of cash on pedals. I definitely recommend getting the full size footswitch that enables you to fully utilize all of the amps capabilities.
    Eventually you may decide to get an expensive tube amp, but this amp will serve you well until then.

    Lisa asks…

    Does anyone know the best way to hook up a 4channel amp to run 5 speakers,, the 5th meaning a sub,little space

    its going on a motorcycle and i have very little space ,, i have now a 4channel amp ( alpine) ,, 2 channels are powing the front and rear speakers and the other 2 channels are bridged to power a 8″ bazooka tube ,, i don’t have the space for a 5 channel amp,and because its going on a bike i don’t have the power to run 2 or more amps,,i have on the bike polk audio componets front and rear ,alpine 4channel amp,and a 8″bazooka base tube,,.

    admin answers:

    It sounds like you have a pretty good plan. Just run the front 2 channels to the high range speakers. Your amp should be 2 ohm stable. And the speakers should be 4 ohms. Run 2 speakers from the left front and 2 speakers from the right front in parallel. Then, bridge the back 2 channels to the sub. Look in the owners manual to find the proper way to bridge the amp. You’ll lose the fader with this configuration. But, it may be your best bet. You could also see if the amp is “tri-mode” stable. In this case you would wire all of the high range speakers off of their own channel. And wire the sub across the rear channels. Again, check the owners manual. The only drawback to this is that you lose all of the on board crossover adjustments. I guess it really depends on what you want to sacrifice..

    Mark asks…

    what’s best amp for mainstream rock?

    looking for a tube amp (perferably under $1000)(and perferably combo) that would be good to gig with and record with. The sound I’m lookin for is almost like a 3 doors down type of sound (not heavy metal and not classic rock) but more of a modern rock sound, I’ve checked out quite a few amps and obviously i wanna try it b4 i buy it but i will mail order if an amp sticks out as exceptional, needs to be a good clean (not fender) and hopefully decent distortion but can add pedals if need be, which i would also take suggestions on pedals that give a nice mordern rock distorted sound. Thanks for your time
    first off i didnt say i wanted to sound exactly like 3 doors down just rock sound like that…. 2nd off you crack me up they’re makeing millions on their sound and you say oh im a real guitarist prolly cuz all you play is scales? well im a rhythm guitarist so yeah my main job is chords 90% of the time, its called team effort, ever hear of it?

    admin answers:

    Have you checked out any Orange or Laney amps? Orange is legendary for rock sounds, and Laney too (although Laneys might have a bit much gain than what you’re looking for). Also, don’t write off Fender amps so quickly, the vintage stuff might be not what you’re looking for, but some of their modern amps are fantastic and can get some really sweet raunchy rock-type distortion.

    Also, don’t rely on what other people say (including myself). Do your own research because what you might think is a great sound, other people might not like and vice versa. Only you know what kind of tone you’re looking for.

    Marie asks…

    I’m building a water based Telescope defogging rig. What kind of pump would be best used for that?

    The system consists of two loops, sharing a common reservoir. Fluid is pulled from reservoir and then pumped to a heater, in this case an automotive windshield washer preheater, and then back in the reservoir. Temperature is monitored by a thermometer. When needed, another pump pumps water from the resivoir through a tube that goes around the scope. I’m trying to find two pumps that take a small diameter tubing (such that is used for washer fluid), however I’m not quite sure what to get. Do you have any suggestions? What kind of amps/voltage would be drawn from the pump?

    admin answers:

    Since you don’t state the amount of water to be pumped in terms of gallons per minute (or hour) it is hard to answer.

    I am assuming you only what a small amount of water. With that in mind, I would suggest you consider a small fountain pump similar to those used on decorative garden fountains. They come in sizes as small maybe 100 gph.

    You can find them on the internet by putting in “pond and waterfall pumps” or “garden fountain pumps” or just “fountain pumps.”

    Powered by Yahoo! Answers


    Related Blogs

      Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

      Assembling the Caps and Resistors Phantastron Turret Board

      Assembling the Phantastron Turret Board

      sheepslinky

      Stop Motion and Video of assembling the Capacitors and Resistors on a Phantastron kit.
      2008


      Related Blogs

        Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

        Questions, Answers And Solutions On Fender Valve Amps

        Charlie asks…

        What type pick ups should i get for my strat?

        ok so i mainly use a fender highway one usa strat for gigs and i generally use different amps for each of the bands im in, the amps are Vox Ac 30 reissue with neo dog speaker and the other one is a peaey duel 2×12 classic valve series, im looking for a fat raw sound, i do use heavy gauge strings and generally tune to Eflat or D, any ideas what i shud choose, iv tried texas specials, bare knucles, seymour duncan sssl-5 vintage staggered, are there any that im missin that giv a real raw blues sound?

        admin answers:

        The Van Zandt blues strat pickup set is quite good, as are Rio Grande Muy Grande strat set. I have used both and got great results. A little hotter and in your face that your standard strat set.

        Right now, I have a custom Bill Lawrence setup in my strat — humbucker, single coil, soap bar — and it does what I want and need. Though I am pretty much a tele guy and all my guitars are custom made for me. Been playing a long time — usually blues/soul/R&B — so I need a variety of tones.

        Daniel asks…

        VOX AC15 OR AC30 to recreate the Shadows 60′s sound?

        I play mainly shadows tunes on my Fender 57 reissue stratocastor.I currently have a Vox AD50VT but i am thinking of changing it to a valve amp to get closer to the real sound(60′s).I am torn between the two Vox amps.I am using a boss CS3 compressor/sustainer +Gemini 111(shadows guitar effect) + Yamaha Magic Stomp(with authentic Shadows echo patches).Please can anyone help me?

        admin answers:

        The Shads actually used AC30′s so..to be authentic…..GO GET ONE!! Haha
        Apart from the WEM copycat, the prince of echo units was the Binson Echorec (cost about £150 even in 1965). I once had a Burns Marvin (ooh). Bruce played a Tele early on (very solid player).
        My elder brother was Shadows mad so I was brought up on them until The Beatles.
        Ps You are in a band arent you!!!
        Http://uk.images.search.yahoo.com/search/images;_ylt=A1f4cfsk.0JIfHcB6pBLBQx.?ei=UTF-8&p=binson%20echorec&rd=r1&fr2=tab-web&fr=fp-tab-sayt1

        Powered by Yahoo! Answers


        Related Blogs

          Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

          Questions, Answers And Solutions On Amplifiers Guitar Acoustic

          Lisa asks…

          Settings for Laney LX12 Amplifier for Acoustic Guitar?

          I have lost the instructions to my LX12 laney amplifier for my acoustic guitar. I do not no what to put all settings on. I dont it to be rock or jazz or anything like that. I want it to just be normal like how the guitar sounds. Does anyone no what i should put it on?

          Anything will help. Thanks

          admin answers:

          Below is a link to the user manual online….

          All you need to know is in there…

          Regards,

          Jim asks…

          I just ordered an electric guitar and have an acoustic amplifier, will it work on my electric guitar?

          Do I need to get a new amplifier that is for electric guitars or can i use the acoustic amplifier?

          admin answers:

          It will work fine, just wont be as effiecient as an electric amp.
          I have a portable amp that was for my acoustics but i use it for all my guitars and bass if i go out anywhere.
          There really isnt such thing as an acoustic amp, amps are amps. The only way to define acoustic and electric is if it has a distortion switch or gain knob.

          Chris asks…

          What is the device called that is used to plug a regular acoustic guitar into an amplifier?

          Hey, i’ve noticed a few of my favorite musicians that play acoustic guitar live are able to amplify their REGULAR acoustic guitars by plugging a little device into the amp. The little device slides under the strings over the tone hole on the body of the guitar
          what is it called??????

          admin answers:

          It’s called a “pickup”

          It’s the same idea as an electric guitar, except for acoustic guitars. They are not very expensive, but depending on what kind you get you may want to pay someone to install it.

          Here’s a site, or you can just google “acoustic guitar pickups”

          http://www.fishman.com/products/acoustic-guitar-pickups.asp

          Jane asks…

          GUITAR: Where do I put the amplifier on my acoustic guitar?

          Is it the tiny hole with a nut screw at the lower body side of my acoustic? Also, what kind of a cable will be used and for what kind of an amp?

          admin answers:

          The cable will probably come with the amp.
          As far as the amp, get the best one you can find if you entertain.
          Or just get a cheap one if you are just messing around.

          You might be able to find one in a Pawn Shop.
          That would be cheaper than in a regular store.

          Helena asks…

          Using an acoustic guitar amplifier as a computer/desktop speaker?

          It is an http://www.guitarcenter.com/Acoustic-AG30-30W-1×8-Acoustic-Guitar-Combo-Amp-104839055-i1425156.gc amp.

          I run it straight out from my computer’s soundcard into the direct in for the amp using a 1/8” male to male connector.This is NOT the guitar input, it is a separate AUX in port. I was wondering if this is better than getting a separate speaker system. (keep in mind that this puppy can get pretty loud if she wants to) I don’t have a whole lot of money to burn, since I’m a student, but I enjoy music, and am an audiophile. I was wondering if there would be a significant improvement that would be worth spending extra if I were to purchase a separate speaker system. To my ear, it sounds fine, But maybe I’m missing out on some of the sounds? perhaps someone bearing technical knowledge of acoustic guitar amplifiers would know better? lemme know if I’m getting quality sound, or if it’s just garbage!

          (BTW the guitar amp ad says that it’s designed to plug in an ipod or some other mp3 device so you can play along with it!)

          admin answers:

          The one drawback is that the amp is MONO not STEREO because it is only one speaker. A normal set of two computer speakers will be stereo. Other than that, if you are happy with it then stick with it.

          Alana asks…

          What’s the name of guitars that look like electric guitars but don’t use amplifiers yet not an acoustic guitar

          admin answers:

          An acoustic-electric guitar?

          Marie asks…

          Can an Acoustic Guitar with a port for connectin it to an amplifier, be connected to a computer?

          I have an acoustic guitar, and it has a port for it to be connected to an amplifier. I want to know is there any such socket which could help me connect my guitar to the midi port of my computer.
          Many Thnks.

          admin answers:

          Are you looking to get actual midi signals or just straight guitar tone? I don’t do a lot of midi music but if that’s what you need then I believe you will need some sort of converter from audio signal to midi.

          If you are just looking to record the sound of the guitar I would recommend that you do not just plug your guitar into your PC. In my experience, this will usually sound BAD.

          I often use the TonePort UX1 made by Line6 to connect my guitar to my computer. You plug your guitar cable into this device and then plug the TonePort into the USB port on your computer.

          It comes with software that does a nice job of simulating a bunch of different amps and effects pedals. Also comes with good recording and editing software. I believe they run around $120. For everything you get you can’t beat the price.

          Good luck,
          Brian
          http://www.MyOnlineGuitar.com

          David asks…

          Electro acoustic guitar amplifier…?

          What type of amplifier would i need for an electro acoustic guitar. I’m not after anything expensive but something suitable and i’m not sure what to get.

          admin answers:

          It is called (surprise!) acoustic guitar amp, and there are inexpensive models from Marshall or Behringer.

          Powered by Yahoo! Answers


          Related Blogs

            Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

            Questions, Answers And Solutions On The Best Guitar Amplifiers

            Ken asks…

            What is the BEST guitar pocket amplifier?

            i am looking for a pocket amp that does not require a cord and just lets me plug it right into the guitar and has distortion and some other effects…tnx!

            admin answers:

            Rockman stuff is good.

            Joseph asks…

            What was the best Guitar Amplifier ever made?

            admin answers:

            Marshall CPS

            Jemima asks…

            best guitar amplifier Combo Cab for death/metalcore?

            Hey i’ve been playing guitar for 2 years now and i have gone through 6 different amps and 4 different guitars, safe to say i have got my favorite guitar now (DBZ Bird of Prey), but i have mixed feeling with amplifiers. I want to know what amplifier is best to play music like suicide silence, BMTH and Job for a cowboy, this means high distortion, good for pinch harmonics, dime bombs and sweeps. I would like the amps settings also if possible.

            admin answers:

            Hello there,

            Amps settings? If you mean you want a digital modeling amp, the Peavey Vypyr 100 would be my first choice for that. Followed by the Fender Mustang III and then third, the Line 6 Spider 150 watt 2×12 would be next in digital modeling.

            However, a good Marshall tube amp would be better than any digital modeling amp. A JMP or a DSL should work for you.

            Later,

            Powered by Yahoo! Answers


            Related Blogs

              Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

              Questions, Answers And Solutions On Vintage Sound Amps

              Davina asks…

              Someone PLZ help me tp choose the right digital piano for me?

              M-Audio DCP-300 Digital Console Piano cost $1099
              •16 high-quality sounds (acoustic pianos based on Steinway Model D Concert Grand, two vintage electric pianos, FM electric piano, clav, harpsichord, church organ, rock organ, strings, upright bass, electric bass, vibes, choir, fantasia, warm synth pad)
              •88-notes realistic TruTouch II graded hammer-action keybed to reproduce the look and feel of acoustic piano keys
              •Four keybed touch modes (low, normal, hi, fixed)
              •Stereo sound system with dual 20-watt amps, 5″ woofers and .75″ silk-dome tweeters
              •Class-compliant USB-MIDI interface (compatible with USB 1.0, 1.1 and 2.0)
              •Includes Sibelius First music notation software
              •64-note maximum polyphony
              •Built-in 2-track recording with 28,000-note memory
              •Compatible with most standard MIDI music software
              •16 demo songs
              •dual headphone jacks and headphone hook
              •Layer mode and Layer Volume
              •Split Mode and Split Volume
              •Master Volume and Tone controls
              •Reverb and Chorus effect
              •Metronome (2/2, 2/4, 3/4, 4/4, 5/4, 6/8, 7/8, 9/8, 12/8)
              •Tempo (20-280BPM)
              •Transpose (+/- 12 semitones)
              •Octave shift (+/- 3 octaves)
              •Pedal board with 3 pedals (soft, sostenuto, and sustain)
              •Sliding key cover, modesty panel, and hinged music stand which folds flat for ideal positioning of laptop computer
              •Elegant finish
              M-Audio DCP-300 Digital Console Piano Specifications:
              •Minimum System Requirements (PC)
              •Windows XP SP2/Vista, 512MB+ RAM, 300MB hard disk space, CD-ROM drive
              •Minimum System Requirements (Mac)
              •Mac OS X 10.4.9 or later, or 10.5, 512MB+ RAM, 300MB hard disk space, CD-ROM drive

              or

              Yamaha YDP140 DIGITAL PIANO W/BENCH Features Cost $899:
              •88 graded hammer- action keys
              •64-note polyphony
              •single-song recording capability
              •6W of amplification per side
              •6 distinct Voices
              •Four types of reverb
              •MIDI connectivity
              •Duet-friendly twin headphone jacks
              •Dark alder finish
              •Includes a padded bench, a wood music rest, sliding key cover, pedal frame with three piano-style pedals and a modesty panel

              admin answers:

              If you realized the M-Audio has way more stuff to do than the yamaha. I would just get M-Aduio.(IT COST MORE CAUSE IT’S BETTER!!!!)DEFINITELY WORTH IT.

              David asks…

              A blow out OR a short?

              Hello! I have a pair of Pioneer upright loudspeakers. They were in good working condition UNTIL during a test of my vintage SA-7800II integraded amp, in searching for a defect in the left chanell(no sound thus right chanell running mono to both speakers) two point stems were inadvertantly touched with a screwdriver tip resulting into a pretty powerful spark. The Unit itself is still fine but both speakers play now with a muffled transistor-radio-like sound with nothing amplified as normal. hooked up and tested to other amps both channels play on both speakers but with the sound mentioned above. Opening up the speaker case (cabinet) I tried to see if it was a shorted wire by aplying a new wire hooked to a separate amp and applied to the terminals inside the cabinet(old wires are obviously still attatched) got the same signal to speakers with non amplified effects. SO is this a short in the speaker itself as in the voice coil? If so, how do I access the voice coil? or is this a blown driver? the driver I see here are two stem terminals on a small tab of circuit board (vocab/sp?) with positive and negatives going to a wire coil spool connected to the cabinet. the terminals supply three speaker wires to tweeter, midrange, and woofer. could it be that spool? no visible damage to any of these. I have yet to see if there was a melt or a gap in the speakers voil coil which is my reasoning for wanting to access same. HOWEVER. if I didnt turn the full wattage up via the volume knob, a melt down wouldnt occur anyhow. Im thinking its either the wires….or the electrode/coil connected to the internal cabinet wall. anyone advise? afterall, I’m still gettin non distorted sound, just distant and muffled low/ If turn up the volume high- I hear the power and sound its trying to push but its akin to turning up a transistor radio up to high and holding it under a pillow.
              Thanks~ rngr47, Osaka, JP.

              admin answers:

              The muffler blew out..funny as heck G..
              Tell us another,a regular laugh riot.

              Charlie asks…

              Why am I getting a weak output signal from my pedalboard/guitar?

              I recently purchased a lot of pedals; ibanez tuner, crybaby wah, rogue vintage compressor, boss super overdrive, danelectro eq, mxr phase 90, danelectro tremelo, and a rogue analog delay. My pedals are set up in this order in my pedal chain which I think is correct from what I’ve read. When I first plug in and start playing, the signal is really good, but then it slowly starts to fade until when I switch to a clean channel there’s no sound at all and on overdrive it’s very weak. All of my pedals have new batteries in them and I think that running a large amount of pedals like that on batteries could be the problem. I wanted to ask the world before I went out and bought a power supply so I hope you respond! By the way, I’ve tried the pedals on two different amps so I know it’s not the amp.

              PLEASE HELP!

              admin answers:

              Dude..buy a Multi-Meter to check the condition of your batteries..
              That’s it for starters..
              I would say..get the proper power supply–rather than use batteries..
              I’ve owned a single pedal..and sometimes I would mis-read the ON/OFF Button..
              ..or just bumping it would turn it on..
              If the Pedal has a input for an AC/DC Cube..use the Cube.

              Powered by Yahoo! Answers


              Related Blogs

                Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

                Questions, Answers And Solutions On Fender Amps

                Kirstie asks…

                What amps did the beatles use during the apple Corp. Rooftop concert?

                I think they used fender amps, but I need to know the specific model if anybody knows

                admin answers:

                Vox amps, like they did in the beginning

                Rachel asks…

                Should I buy a Peavey Classic 30 or save up and buy a Fender Amp. Like a Vibrolux or Twin?

                I really like the sound of the Classic 30 but all you ever hear about are the fender amps and how well they sound. Anyone have a recommendation or used any of these amps?

                admin answers:

                Trust you ears young Skywalker.

                May the Tone be with you.

                Srsly, Peavey is good ampage. Only you are responsible for how you sound, go with the* amp you think will help you achieve the sound you want.

                As for the Fenders, the Vibrolux looks nice, but the Twin is an anachronistic holdover from the wattage wars of the ’60s and ’70s that takes two men and a boy to carry and can’t be dialed above 2 without the owner of the joint telling you to “turn that dang thing down.” The Twin is a great amp, but about all you can use it for today is super clean country or jazz with reverb, you just can’t get the volume up to gnarly levels at any place smaller than a coliseum.

                *[reliable, and in this case both Peavey and Fender have earned good reputations for reliability]

                Lisa asks…

                are fender amps any good?

                are they expensive and are they good?

                admin answers:

                They’re old bassman amps from the 60′s were great. Over the years they have had some decent amps, and are more known for their reverb units and clean tone. Their cheap amps are not great at all, but they have some higher quality ones that are real nice.

                Joseph asks…

                Are Fender AMPS any good?

                admin answers:

                10 amp Amplifier is allright for practising, but ideally you should aim for something 15 amp+. They’re a pretty versatile make, but there’s nothing wrong with being a sheep, and getting a Marshall.

                Charlie asks…

                Gallien Krueger vs Fender vs Warwick (bass amps)?

                I have to pick between a GK Blackline 110, Warwick Blue Cab 60, and a Fender Rumble 60. All these have the same watts except for the GK which has 70. The bassist from Avenged Sevenfold uses GK amps. Mike Dirnt from Greenday uses the Fender Rumble series and so does the bassist from Anthrax and Pete Wentz from Fall Out Boy. I have no clue who uses Warwick amps. I play all kinds of rock so im looking for something that can be used for metal, punk, alt rock, hard rock and good old fashioned rock rock. The Fender one has some lights at the bottom that flash as you play but no F/X. The other 2 have some F/X but no cool light show =(. Which would be most versatile? Best sounding? Most reliable? Looks cool? Heres the links for the 3 amps

                GK

                http://www.guitarcenter.com/Gallien-Krueger-Backline-110-Combo-103055984-i1145823.gc

                Warwick

                http://www.guitarcenter.com/Warwick-Blue-Cab-60-60W-1×12-Bass-Combo-Amp-483056-i1321474.gc

                Fender

                http://www.guitarcenter.com/Fender-Rumble-60-Bass-Combo-Amp-102497088-i1145412.gc

                Almost forgot, If you have any other recomendations post those too. But im mainly looking at these 3.

                admin answers:

                I have 2 GK Keyboard amps, which we use in tandem for stereo, rather than the usual setup. They are over 20 years old – and work a CHARM. We had the speakers replaced this past year – gee, after 20 years, we took them in for a check-up – they were STILL playing fine when we took them in! We run mixers thru them, and they have bounced all over our gigs ( we are classical musicians, but amps are amps!). They LOOK great, sound fabulous, pump out 100 watts per channel, and have NEVER let us down. AND – since they are concentric, they are smaller per watt, and LIGHTER per watt, than ANYTHING else out there. Every so often, I *go shopping* again – and ask all my friend whose opinions I respect – and NOBODY EVER comes up with anything to touch these. Yes, – they cost a ransom – but divided by the number of YEARS they work??? I have turned over ALL the equipment in my rig ( that’s into 6 figures worth) at least TWICE – and still kept these. If they were stolen today, I’d buy the SAME ONES tomorrow.

                How’s THAT for an endorsement – in case you wondered how they hold up over time?

                Powered by Yahoo! Answers


                Related Blogs

                  Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

                  Questions, Answers And Solutions On Valve Amps Guitar

                  Alana asks…

                  Do Line 6 amps make all guitars sound the same?

                  Just wondering cause I heard that somewhere. And I’m thinking of getting a Spider Valve 112 or 212. So ya thanks in advanced!

                  admin answers:

                  Sort of. They HEAVILY process your raw guitar signal so there is the chance that you will lose the tonal nuances that make your guitar unique. Remember that line 6 amps (and other similar amps/modellers) require TONS of parameter tweaking to get the right sound. I would recommend getting a simple tube amp unless you want to really get into programming. On the other hand, if you like synths and drum machines and the like, then a line 6 might be good for you since you are familiar with all the technical stuff. So the question is: do you want to spend time playing guitar or programming your amp? If you get a line 6 and dont spend the time programming, your guitar tone will suck.

                  Helena asks…

                  How does a Line 6 Spider III [75 watt] compare to a Epiphone Valve Junior Half Stack [5 watt]?

                  What I understand with guitar amps, is that tone is more important than volume. Right now though, I am confused about which amp I should get. My brother wants to buy me a Line 6 Spider III amp, the 75 watt one, but my friend tells me that I should buy a Epiphone Valve Junior Half Stack, which is a 5 watt. Price range is about the same, but I am really confused as to which I should buy.

                  I have a Japanese-made ESP Viper, with ESP LH200 pick-ups, if that helps a bit.
                  Nate – My playing preferences are metal/rock. My price range is… probably under $300. Mainly I want a decent amp, with a good tone, that will last me a long time, and will go great with my guitar.
                  I took a look at the UG Community link. I was wondering how the Epiphone Junior compares to the Blackheart BH5H and BH112 Half Stack. The price is the same, the specs are almost the same, but Epiphone is a more recognized name.

                  http://www.musiciansfriend.com/product/Blackheart-BH5H-and-BH112-Half-Stack?sku=483078

                  http://www.musiciansfriend.com/product/Epiphone-Valve-Jr-HalfStack?sku=481475

                  admin answers:

                  Get the epi jr, it may be small, but for $250 the tone is amazing, plus if you run a good OD into it, you can get some good hard blues/rock overdriven tones.
                  Whatever you do, do not get the Spider 3, it is pretty much a solid state hunk of junk. Its price and bells and whistles may be appealing, but the tone is just thin, forced, and too digital sounding.
                  It is no less than a fisher price toy aimed at buyers who think: OMG l0tz of w4ttag3 and 3ffectz for ch3ap!!!

                  EDIT: However, if your looking for a good high gain, more modern/metal type of tone, your gonna have to pool your money for something nicer.

                  It would really help me if you told me your price range and playing preferences.

                  EDIT 2: Read this http://ultimate-guitar.com/forum/showthread.php?t=745620&highlight=spider+marshall+mg+line+6+fender

                  Powered by Yahoo! Answers


                  Related Blogs

                    Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment

                    Questions, Answers And Solutions On Fender Amp Clones

                    Daniel asks…

                    What amp should I buy?

                    I want an amp that’s good for grunge/punk and that can give me a nice clean tone, and plunge into a heavy distortion. It needs to be relatively low priced, at least 50 watts, and not tubed. My pedals I use are Boss Ds-1 and 2, Electro Harmonix Big Muff, Poly Chorus, Small Clone, and a Boss Super Chorus. My main guitar is a Fender 1969 Mustang reissue, which has single coil pickups. Any suggestions on what I should go for?
                    Oh yea, the amps I’ve alredy owned/tried are: B-52 Ls-100 and At-212, Raven Rg-100, Vox VT-100 and VT-50, Fender Frontman 1×12, and a Peavey Vypyer 30. The Vox VT-50 is my amp now, which is alright, but I need something a little better for grunge

                    admin answers:

                    Why no tubes?

                    I think Vox is making the most quality amps these days. My buddy has a 100 watt 2×12 combo that I like a lot. It’s a valvetronix something or other; Guitar Center carries them.

                    The Fender Frontman amps are pretty cheap, but they come with a 5 year warranty that is easy as pie to cash in on if needed.

                    I also have really enjoyed some Ashdown amps I’ve played on at stores. They are a relatively new British company. Their gear is still pretty inexpensive, but watch for the prices to rise a lot in the next few years.

                    Personally I like a lot of low end in my sound so I play through Laney and Randall amps mostly. Hiwatt or a classic Orange would be cool too.

                    Susan asks…

                    Selling some stuff on craigslist! Need help setting starting prices.?

                    Original Xbox:
                    2 Controllers

                    6 games: Call of Duty 3, Need for Speed Underground 2,
                    The Elder Scrolls 3 Morrowind, championship bowling,
                    Spider man 2 and Star wars clone wars/tetris CD

                    DVD controller and receiver

                    Both xbox power cords and TV jack cord
                    (Price $_____)

                    World of Warcraft software:

                    Original Wow disks 1,2,3,4,5 (all)

                    Expansion Burning Crusade disks 1,2,3,4 (all)

                    Note: No account included or access keys!!
                    (Price $_____)

                    Guild wars Nightfall Software + Account!

                    Guild wars nightfall disks 1,2,3 (all)

                    Guild wars account (can change email and password anytime)
                    (price $_____)

                    Red Fender Squire:

                    Great condition I’m getting it for a really good deal
                    50 bucks so I’m shooting for something like 120 and if it helps i can get a good amp
                    for about 50 bucks if it will help sell
                    (Price $_____)

                    admin answers:

                    Best advice i can give you is to base your price on the condition of what you are trying to sell and to see what you would get if you traded it at EB Games or places like that then at 20-50 dollars to the price

                    Powered by Yahoo! Answers


                    Related Blogs

                      Posted in Hand Wired AmpsTips, Tricks, Answers and Solutions | Leave a comment
                      buy email lists